RC10 – Combination and Rock Augers
Digga’s new generation premium auger range is designed with the ultimate in performance, quality and cost effectiveness in mind. With the RC10 range, you benefit from its 1 3/4 hex drive pilot over the square drive – giving machines with higher down pressure and higher torque greater strength. The RC10 suits Excavators up to 50 ton for drilling in earth & hard fracturable rock.
The RC10 is a an all purpose taper tooth auger which provides a clean hole every time. This auger has been designed with a double flight configuration as in the RC8, but with upgraded flights for more durability when used in larger machines. Its heavy duty body allows for greater reliability in tough conditions.
Can’t get your old teeth out? Digga’s ingenious Knock In, Knock Out tooth locking system (PADLOC) eliminates the need for cumbersome tools to remove the auger teeth.
RC10 Auger Specifications
| SPECIFICATIONS |  |
|
| DRILLING CONDITIONS | COMBO ROCK / EARTH | |
| HUB | 4″ SQUARE | |
| OPTIONAL HUB | 3″ HEX | |
| OVERALL LENGTH | 60″ | |
| PIPE | 3″ – 6.5″ | |
| FLIGHTS (LEAD) | 5/8″ | |
| FLIGHTS (CARRY) | 5/8″ | |
| TEETH | TTD | |
| PILOT | PH-3 | |
| MAX SIZE | 78″ | |
| IDEAL DRIVES | 13DDS-30DDS | |
| OPTIMUM DRILLING SPEEDS | ||
| EARTH | 55-65 | |
| CLAY | 45-55 | |
| SHALE (FRACTURABLE ROCK) |
25-45 | |
| HEAVY ROCK | 10-25 | |
| AUGER FEATURES | DOUBLE FLIGHT CONFIGURATION UPGRADED FLIGHTS FROM 3/8” TO 5/8” FOR GREATER DURABILITY & PERFORMANCE WITH LARGER MACHINES | |
RC11 – Combination Earth and Rock Augers
RC11 augers are available with a range of different teeth options to suit most ground conditions including earth, hard soils, shale, clay, and permafrost. With the RC11, you get all the benefits of the RC10 plus the superior penetrating ability of the larger BB tooth head and extra havy duty TTL teeth. The RC11 comes complete with all purpose taper teeth perfect for combination drilling in all conditions – from earth to medium rock, providing a clean hole every time. RC11 teeth are easy to install and remove with Digga’s ingenious knock in, knock out tooth locking system which eliminates the need to use extra tools to remove the teeth.
RC11 Auger Specifications
| SPECIFICATIONS |  |
|
| DRILLING CONDITIONS | COMBO HEAVY DUTY ROCK / EARTH | |
| HUB | 4″ SQUARE | |
| OPTIONAL HUB | 3″ HEX | |
| OVERALL LENGTH | 60″ | |
| PIPE | 4.5″ – 6.5″ | |
| FLIGHTS (LEAD) | 5/8″ | |
| FLIGHTS (CARRY) | 5/8″ | |
| TEETH | TTL | |
| PILOT | PH-3 | |
| MAX SIZE | 78″ | |
| IDEAL DRIVES | 13DD-30DD | |
| OPTIMUM DRILLING SPEEDS | ||
| EARTH | 55-65 | |
| CLAY | 45-55 | |
| SHALE (FRACTURABLE ROCK) |
25-45 | |
| HEAVY ROCK | 10-25 | |
| AUGER FEATURES | DOUBLE FLIGHT CONFIGURATION UPGRADED FLIGHTS FROM 3/8” TO 5/8” FOR GREATER DURABILITY & PERFORMANCE WITH LARGER MACHINES | |
DR11 – Dedicated Rock Augers
Digga’s DR11 AUGER features rotating rock picks and is specially designed for drilling from soft fracturable rock to very hard rock. DR11 Auger also feature short flighting to encourage regular spoil removal, allowing cool air to enter the hole and facilitate regular inspection of Carbide Bullet Teeth.
DR11 Auger Specifications
| SPECIFICATIONS |  |
|
| DRILLING CONDITIONS | DEDICATED ROCK | |
| HUB | 4″ HEX | |
| OPTIONAL HUB | 5″ HEX | |
| OVERALL LENGTH | 60″ | |
| PIPE | 3″ – 5.5″ | |
| FLIGHTS (LEAD) | 13/16″ | |
| FLIGHTS (CARRY) | 5/8″ | |
| TEETH | 3/4″ ROCK PICK | |
| PILOT | DP-UAPC31-SA | |
| MAX SIZE | 60″ | |
| IDEAL DRIVES | 20DD-30DD,SD45-SD95 | |
| OPTIMUM DRILLING SPEEDS | ||
| EARTH | N / A | |
| CLAY | N / A | |
| SHALE (FRACTURABLE ROCK) |
25-45 | |
| HEAVY ROCK | 10-25 | |
| AUGER FEATURES | DOUBLE START, SINGLE CARRY FLIGHT CONFIGURATION. SHALLOW FLIGHT PITCH FOR MAX SPOIL REMOVAL. SHORT FLIGHTED AUGERS, ENCOURAGES REGULAR REMOVAL OF SPOIL, ALLOWING COOL AIR TO ENTER THE HOLE & REGULAR INSPECTION OF TEETH. | |
Similar Products
