Call us
High Flow Skid Steer Image

High Flow Skid Steer

Call for Pricing

Price

Make:
Digga
Model:
High Flow Skid Steer
Category:
Digga, Drilling Drives, New
Drilling Drives for High Flow Skid Steer Loaders

Digga’s range of drilling drives for high flow skid steer loaders are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions.

Available in Single Speed Std, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV “Energy Control Valve” ensures complete protection against pile ‘flickback’ damaging your motor.

Features 
  • Compact high torque Digga manufactured gearbox
  • Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
  • 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
  • Single speed & two speed models available
  • Lifetime shaft pull out warranty
  • 5 year gear box and 3 year motor warranty
  • Over 30 years design and manufacturing experience
  • Easily converted to a screw anchor drive with the addition of our patented ‘anti kickback valve’
DESCRIPTION 4DDS 5DDS 6DDS
TORQUE (FT-LBS @ 3000 PSI 3,583 3,903 4,909
MAX TORQUE FT-LBS @ 3500 PSI 4,180 4,553 5,728
RECOMMENDED FLOW (GPM) 10-36 10-36 12-36
MOTOR TYPE EATON EATON EATON
MAX PRESSURE – DO NOT EXCEED 3500 PSI @ 27 GPM
MAX FLOW – DO NOT EXCEED 42 GPM @ 3100 PSI 55 GPM @ 1700 PSI
MAX HORSE POWER 55 55 55
PRESSURE RELIEF VALVE INCLUDED INCLUDED INCLUDED
STANDARD OUTPUT SHAFT 2” HEX 2.5″ HEX 2.5″ HEX
RECOMMENDED AUGER A4/RC4 A6/RC6 A6/RC6
MAX AUGER DRILLING (CLAY / SHALE)* 24″ 24″ 30″
MAX DRILLING DIAMETER EARTH* 40″ 40″ 40″
WEIGHT (LBS) 180 290 290
OVERALL LENGTH (IN) 29″ 33.7″ 33.7″
DIAMETER (IN) 9.4″ 11.4″ 11.4″

Similar Products

Mini Excavator 0.75T-3T Image

Mini Excavator 0.75T-3T

Call for Pricing
Drilling Drives for Mini Excavators 0.75ton to 3ton Digga’s rang...
Machines 4.5T-15T Image

Machines 4.5T-15T

Call for Pricing
A6 – General Augers Digga’s new generation premium auger range i...
Mini Machine Anchor Drive Image

Mini Machine Anchor Drive

Call for Pricing
Developed in conjunction with leading screw anchor / helical pile inst...
Mini Excavator 3T-5T Image

Mini Excavator 3T-5T

Call for Pricing
Drilling Drives for Mini Excavators 3ton to 5ton Digga’s range o...
Auger Wear-parts Image

Auger Wear-parts

Call for Pricing
Our extensive range of wearparts are designed to suit most augers ...
Trencher Chain Options Image

Trencher Chain Options

Call for Pricing
Chain Options to suit Digga Trenchers Choose from three types of tren...
2 Speed Drilling Drives for Excavators and Backhoe Image

2 Speed Drilling Drives for Excavators and Backhoe

Call for Pricing
Digga’s 2 Speed Auger Drives are designed to suit excavators & s...
Excavator 13T-16T Image

Excavator 13T-16T

Call for Pricing
Drilling Drives for Excavators 13 ton to 16 ton Digga’s range of...