Drilling Drives for Truck Cranes and Telehandlers

Digga’s range of drilling drives for truck cranes and telehandlers are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions.

Available in Single Speed Std, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV “Energy Control Valve” ensures complete protection against pile ‘flickback’ damaging your motor.

Features

Compact high torque Digga manufactured gearbox
Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
Lifetime shaft pull out warranty
5 year gear box and 3 year motor warranty
Over 30 years design and manufacturing experience
Easily converted to a screw anchor drive with the addition of our patented ‘anti kickback valve’

DETAILS	5DDS	6DDS	7DDS	9DDS
TORQUE (FT-LBS @ 3000 PSI)	3,903	4,909	6,162	7,811
MAX TORQUE (FT-LBS @ 3500 PSI)	4,553	5,728	7,189	9,112
RECOMMENDED FLOW (GPM)	10-36	12-36	14-36	18-48
MOTOR TYPE	EATON	EATON	EATON	EATON
MAX PRESSURE (DO NOT EXCEED)	3500 PSI @ 27 GPM			3500 PSI @ 29 GPM
MAX FLOW (DO NOT EXCEED)	55 GPM @ 1700 PSI			55 GPM @ 1800 PSI
MAX HORSE POWER	55	55	55	60
PRESSURE RELIEF VALVE	INCLUDED	INCLUDED	INCLUDED	INCLUDED
STANDARD OUTPUT SHAFT	2.5″ HEX	2.5″ HEX	2.5″ HEX	2.5″ HEX

RECOMMENDED AUGER	A6/RC6	A6/RC6	A6/RC6	A8/RC8
MAX DRILLING DIAMETER (CLAY / SHALE)*	24″	30″	30″	48″
MAX DRILLING DIAMETER (EARTH)*	40″	40″	48″	48″
WEIGHT (LBS)	290	290	290	350
OVERALL LENGTH (IN)	33.7″	33.7″	33.7″	37.2″
DIAMETER (IN)	11.4″	11.4″	11.4″	11.4″

HDRG Series Road Grader

Call for Price

Similar Products

Compact Road Graders

Road Grader RG72 Series